Nokia 6288 - Phone

Settings
59 Copyright © 2007 Nokia. All rights reserved.
Call waiting > Activate — to have the
network notify you of an incoming call
while you have a call in progress
(network service). See “Call waiting,”
p. 22.
Summary after call > On — to briefly
display the approximate duration and
cost (network service) of the call after
each call
Send my caller ID > Yes — to show your
phone number to the person you are
calling (network service). To use the
setting agreed upon with your service
provider, select Set by network.
Line for outgoing calls — to select the
phone line 1 or 2 for making calls if
supported by your SIM card (network
service).
Slide call handling — to set the phone to
answer calls when you open the slide, or
end the calls when you close it.
Video to voice auto-redial — to select
whether the phone automatically makes
a voice call to the number to which a
video call failed.
■ Phone
Select Menu > Settings > Phone and
from the following options:
Language settings — to set the display
language of your phone, select Phone
language. If you select Automatic, the
phone selects the language according to
the information on the SIM card.
To select the USIM card language, select
SIM language.
To set a language for the voice playback,
select Voice playback language. See
“Make a voice dialing call,” p. 21 and
Voice commands in “My shortcuts,” p. 52.
Memory status — to see how much of the
phone’s memory is reserved and how
much is free.
Automatic keyguard — to set the keypad
of your phone to lock automatically after
a preset time delay when the phone is in
the standby mode and no function of the
phone has been used. Select On, and set
the time.
Security keyguard — to set the phone to
ask for the security code when you
unlock the keyguard. Enter the security
code, and select On.
When the keyguard is on, calls still may
be possible to the official emergency
number programmed into your device.
Welcome note — to write the note you
would like to be shown briefly when the
phone is switched on.
Network mode — to select dual mode
(UMTS and GSM), UMTS, or GSM.
You cannot access this option during an
active call.