Messaging
43 Copyright © 2007 Nokia. All rights reserved.
automatically, manually after being
prompted, or to reject the reception. This
setting is not shown if Allow multimedia
recept. is set to No.
Allow adverts — to receive or reject
advertisements. This setting is not shown
if Allow multimedia recept. is set to No,
or Incoming multim. msgs. is set to
Reject.
Configuration settings > Configuration —
only the configurations that support
multimedia messaging are shown. Select
a service provider, Default, or Personal
configuration for multimedia messaging.
Select Account and a multimedia
messaging service account contained in
the active configuration settings.
E-mail
The settings affect the sending, receiving,
and viewing of e-mail.
You may receive the configuration
settings for the e-mail application as a
configuration message.
See “Configuration settings service,” p. 9.
You can also enter the settings manually.
See “Configuration,” p. 60.
To activate the settings for the e-mail
application, select Menu > Messaging >
Message settings > E-mail messages and
from the following options:
Configuration — Select the set that you
want to activate.
Account — Select an account provided by
the service provider.
My name — Enter your name or
nickname.
E-mail address — Enter your e-mail
address.
Include signature — You can define a
signature that is automatically added to
the end of your e-mail when you write
your message.
Reply-to address — Enter the e-mail
address to which you want the replies to
be sent.
SMTP user name — Enter the name that
you want to use for outgoing mail.
SMTP password — Enter the password
that you want to use for outgoing mail.
Display terminal window — Select Yes to
perform manual user authentication for
intranet connections.
Incoming server type — Select POP3 or
IMAP4, depending on the type of e-mail
system that you are using. If both types
are supported, select IMAP4.
Incoming mail settings — Select available
options for POP3 or IMAP4.
To Next Page
Loading...
