Nokia 6288 - Page 154

Settings
55 Copyright © 2007 Nokia. All rights reserved.
Paired devices — to search for any
Bluetooth device in range. Select New to
list any Bluetooth device in range. Scroll
to a device, and select Pair. Enter the
Bluetooth passcode of the device to
associate (pair) the device to your phone.
You must only give this passcode when
you connect to the device for the first
time. Your phone connects to the device,
and you can start data transfer.
Bluetooth wireless
connection
Select Menu > Settings > Connectivity >
Bluetooth. To check which Bluetooth
connection is currently active, select
Active devices. To view a list of Bluetooth
devices that are currently paired with the
phone, select Paired devices.
Select Options to access available
options depending on the status of the
device and the Bluetooth connection.
Select Connect > Assign short name or
Auto-conn. without conf..
Bluetooth settings
To define how your phone is shown to
other Bluetooth devices, select Menu >
Settings > Connectivity > Bluetooth >
My phone's visibility or My phone's name.
Operating the phone in hidden mode is a
safer way to avoid malicious software.
Do not accept Bluetooth connectivity
from sources you do not trust.
As another alternative - switch off the
Bluetooth functionality. This will not
affect other functionalities of the phone.
Infrared
You can send or receive data to or from a
compatible phone or data device (for
example, a computer) through the
infrared (IR) port of your phone. To use an
IR connection, the device with which you
want to establish a connection must be
IrDA compliant.
Do not point the IR (infrared) beam at
anyone's eye or allow it to interfere with
other IR devices. This device is a Class 1
laser product.
When sending or receiving data, ensure
that the IR ports of the sending and
receiving devices are pointing at each
other and that there are no obstructions
between the devices.
To activate the IR port of your phone,
select Menu > Settings > Connectivity >
Infrared.
To deactivate the IR connection, select
Menu > Settings > Connectivity >
Infrared. When the phone displays
Deactivate infrared?, select Yes.
If data transfer is not started within 2
minutes after the activation of the IR
port, the connection is canceled and
must be started again.