Nokia 6290 - Call Functions; Make a Call; Speed Dialing; Voice Dialing and Voice Commands

Copyright © 2007 Nokia. All rights reserved.
Call functions
23
Call functions
Make a call
1 In the standby mode, enter the phone number,
including the area code. Press the clear key to remove
a number.
For international calls, press * twice for the
international prefix (the + character replaces the
international access code), and enter the country code,
area code (omit the leading zero if necessary), and
phone number.
2 To call the number, press the call key.
To adjust the volume during the call, press the volume
keys.
3 To end the call, or to cancel the call attempt, press the
end key.
To make a call from Contacts, select Menu > Contacts.
Scroll to the desired name; or enter the first letters of the
name, and scroll to the desired name. To call the number,
press the call key.
To call your call mailbox (network service), press and hold
1 in the standby mode. You must define the call mailbox
number before you can call your call mailbox. See “Call
mailbox,” p. 78.
To call a recently dialed number, press the call key in the
standby mode. The list of the last 20 numbers you called
or attempted to call is shown. Scroll to the number you
want, and press the call key.
To make a push to talk call, see “Push to talk,” p. 86.
Speed dialing
You can assign a phone number to one of the speed dialing
keys 2 to 9. See “Assign speed dialing keys,” p. 42.
Call a speed dialing number in either of the following
ways:
• Press the speed dialing key, then the call key.
•If Speed dialling is set to On, press and hold the speed
dialing key until the call begins. To set Speed dialling
to On, select Menu > Settings > Settings > Phone >
Call > Speed dialling > On.
Voice dialing and voice commands
A voice tag is added automatically to all entries in
Contacts.
Use long names, and avoid similar names for different
numbers.