Copyright © 2007 Nokia. All rights reserved.
Connectivity
87
Settings for PTT
For PTT service settings, contact your service provider.
To view and change PTT settings, select Menu >
Settings > Connectivity > PTT > Options > Settings >
User settings or Connection settings.
User settings
Accepted list calls — To see a notification of incoming
calls, select Notify. To answer PTT calls automatically,
select Auto-accept. If you do not want to receive PTT calls,
select Not allowed.
PTT call alert tone — Select the tone for incoming PTT
calls. If you want the incoming call alert setting for PTT to
follow your profile settings, select Set by profile. For
example, if your profile is silent, PTT is set to do not disturb
(DND) and, except for callback requests, you are not
available to others using push to talk.
Callback request tone — Select a tone for callback
requests.
Application start-up — To start PTT automatically, select
Always automatic. To start PTT automatically only while in
your home network, select Auto in home netw..
Default nickname — Enter your nickname shown to other
users. Your service provider may have disabled the editing
of this option.
Show my PTT address — Select Never if you want to hide
your PTT address from others.
Show my login status — Select whether your status is
shown to others.
Connection settings
Contact your PTT service provider for the connection
settings.
Log in to PTT
Select Menu > Settings > Connectivity > PTT, or press
the PTT key. PTT automatically logs in to the service when
started.
When log in is successful, PTT automatically connects to
channels that were active when the application was last
closed. If the connection is lost, the device automatically
tries to log back in until you exit PTT.
indicates a PTT connection.
indicates that PTT is set to do not disturb (DND).
Exit PTT
Select Menu > Settings > Connectivity > PTT >
Options > Exit. Log out from PTT after exiting
application? is displayed. Select Yes to log out and close
To Next Page
Loading...
