EasyManua.ls Logo

Nokia 6290 - Page 169

Nokia 6290
203 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Copyright © 2007 Nokia. All rights reserved.
Settings
71
Answer if fold opened — to set whether opening the fold
answers an incoming call
Sleep modeto set whether the cover display is switched
off when the power saver time-out is reached. To switch on
the cover display when the sleep mode is active, press the
left, middle, or right cover key.
Security
Select Phone and SIM card, Certificate management, or
Security module.
Phone and SIM card
You can change the following codes: lock code, (U)PIN
code, and PIN2 code. These codes can only include the
numbers from 0 to 9.
Avoid using access codes similar to emergency numbers to
prevent accidental dialing of the emergency number.
Code in use — to select the active code, PIN or UPIN, for
the active USIM. This is shown only if the active USIM
supports UPIN, and the UPIN is not rejected.
PIN code request or UPIN code request — to set the
phone to request the code each time the phone is switched
on. Some SIM cards may not allow the PIN code request to
be turned Off. If you select Code in use > UPIN, UPIN
code request is shown instead.
PIN code or UPIN code, PIN2 code, and Lock code — to
change the codes
Keypad autolock period > User defined — to
automatically lock the keypad after a defined period of
inactivity
Phone autolock period — to set a time-out after which
the phone is automatically locked. To use the phone again,
you need to enter the correct lock code. To turn off the
autolock period, select None.
Lock if SIM card changed — to set the phone to prompt
for the lock code when an unknown, new SIM card is
inserted into your phone. The phone keeps a list of SIM
cards that are recognized as the owner cards.
Closed user group (network service) — to specify a group
of people whom you can call and who can call you. For
more information, contact your service provider. To
activate the default group agreed on with the service
provider, select Default. If you want to use another group
(you need to know the group index number), select On.
When security features that restrict calls are in use (such
as call barring, closed user group, and fixed dialing), calls
may be possible to the official emergency number
programmed into your device.
Confirm SIM services (network service) — to set the
phone to display confirmation messages when you use a
SIM card service

Table of Contents

Other manuals for Nokia 6290

Related product manuals