Copyright © 2007 Nokia. All rights reserved.
Connectivity
90
and infrared are available on both devices, it is preferable
to use Bluetooth.
Depending on the other phone, synchronization may not
be possible and data can be copied only once.
To transfer or synchronize data, do the following:
1 When using infrared, place the devices so that the
infrared ports face each other, and activate infrared on
both devices.
Select Menu > Settings > Connectivity > Transfer. If
you have not used Transfer before, information about
the application is displayed. Select Continue to start
transferring data.
If you have used Data transfer, select Transfer data.
2 Select whether to use Bluetooth or infrared for
transferring the data. When using Bluetooth, the
phones need to be paired in order to transfer data.
Depending on the type of the other phone, an
application may be sent and installed on the other
phone to enable the data transfer. Follow the
instructions.
3 Select what content you want to be transferred to
your phone.
4 Content is transferred to your phone. The transfer time
depends on the amount of data. You can stop the
transfer and continue later.
To Next Page
Loading...
