PAGE 11 (18) Approved 1.0
Nokia Mobile Phones Customer Care E&A
SQX 00441-en MWy
Technical Services, Repair Concepts Confidential 15.04.2002
6. DISASSEMBLY INSTRUCTIONS
Take care that your workbench is always clean and
protect the Window with a foil against dust and
scratches.
To open the unit, four T6 screws have to be opened.
Do not use your torque driver for this, because
torque drivers are mostly designed for fastening
and not for opening screws.
Hold the unit with the Volume Key against the table.
Hold the A-Cover with your left hand and then take
the B-Cover to unlock the side snaps in the bottom
area.
Before loosening the upper snaps of the cover be
sure that you press the module against the A-Cover.
The module is still fixed to the A-Cover with one
hidden screw in the antenna area.
There are three clips, which have to be released. Be
careful when pulling the covers apart in the antenna
area. It is easier if you wobble the covers carefully
against each other.
This is the screw, which fixes the Antenna and holds
the module inside the A-Cover.
Service Manual 6310i Level 2 Copyright 2002 © Nokia Corporation
To Next Page
Loading...
