Call functions
Copyright © 2006 Nokia. All rights reserved.
23
3. Call functions
■ Make a call
1. Enter the phone number,
including the area code.
For international calls, press *
twice for the international
prefix (the + character replaces
the international access code),
enter the country code, the
area code without the leading
0, if necessary, and the phone
number.
2. To call the number, press the
call key.
To adjust the volume in a call,
press the volume up or down
key.
3. To end the call or to cancel the
call attempt, press the end key,
or close the phone.
To search for a name or phone
number that you have saved in
Contacts, see ”Search for a
contact” p. 41. Press the call key to
call the number.
To access the list of dialed
numbers, press the call key once in
the standby mode. To call the
number, select a number or name,
and press the call key.
Speed dialing
Assign a phone number to one of
the speed-dialing keys, 2 to 9. See
”Speed dials” p. 43. Call the
number in either of the following
ways:
• Press a speed-dialing key, then
the call key.
•If Speed dialling is set to On,
press and hold a speed-dialing
key until the call begins. See
Speed dialling in ”Call” p. 51.
Enhanced voice dialing
You can make a phone call by
saying the name that is saved in
the contact list of the phone. Voice
commands are language-
dependent. To set the language,
see Recognition lang. in ”Phone”
p. 52.
Note: Using voice tags
may be difficult in a noisy
environment or during an
emergency, so you should
not rely solely upon voice
dialing in all
circumstances.
1. In the standby mode, press and
hold the right selection key, or
press and hold the volume
To Next Page
Loading...
