Settings
Copyright © 2006 Nokia. All rights reserved.
51
phone on the PC. Use Bluetooth
wireless technology or a USB data
cable for the synchronization, and
start the synchronization from the
PC.
Synchronize from a server
To use a remote Internet server,
subscribe to a synchronization
service. For more information and
the settings required for this
service, contact your service
provider. You may receive the
settings as a configuration
message. See ”Configuration
settings service” p. 13 and
”Configuration” p. 54.
To start the synchronization from
your phone, select Menu >
Settings > Connectivity > Data
transfer > Server sync. Depending
on the settings, select Initialising
synchronisation or Initialising
copy.
Synchronizing for the first time or
after an interrupted
synchronization may take up to 30
minutes to complete.
USB data cable
You can use the USB data cable to
transfer data between the phone
and a compatible PC or a printer
supporting PictBridge. You can
also use the USB data cable with
Nokia PC Suite.
To activate the phone for data
transfer or image printing, connect
the data cable. Confirm USB data
cable connected. Select mode.
and select from the following
options:
Nokia mode — to use the cable for
PC Suite
Printing & media — to use the
phone with a PictBridge
compatible printer or with your
compatible PC
Data storage — to connect to a PC
that does not have Nokia software
and use the phone as a data
storage device
To change the USB mode, select
Menu > Settings > Connectivity
> USB data cable > Nokia mode,
Printing & media, or Data
storage.
■ Call
Select Menu > Settings > Call and
from the following options:
Call divert — to divert your
incoming calls (network service).
You may not be able to divert your
calls if some call barring functions
are active. See Call barring service
in ”Security” p. 54.
Voice clarity > Active — to
enhance speech intelligibility
especially in noisy environments
To Next Page
Loading...
