Call functions
24
Copyright © 2006 Nokia. All rights reserved.
down key. A short tone is
played, and Speak now is
displayed.
2. Say the voice command clearly.
If the voice recognition is
successful, a list with matches
is shown. The phone plays the
voice command of the match
on the top of the list. If the
result is not the correct one,
scroll to another entry.
Using voice commands to carry
out a selected phone function
is similar to voice dialing. See
Voice commands in ”My
shortcuts” p. 47.
■ Answer or reject a call
To answer an incoming call, press
the call key, or open the phone. To
end the call, press the end key, or
close the phone.
To reject an incoming call, press
the end key. To mute the ringing
tone, select Silence.
Call waiting
To answer the waiting call during
an active call (network service),
press the call key. The first call is
put on hold. To end the active call,
press the end key.
To activate the Call waiting
function, see ”Call” p. 51.
■ Options during a call
Many of the options that you can
use during a call are network
services. For availability, contact
your service provider.
During a call, select Options and
from the following options:
Call options are Mute or Unmute,
Contacts, Menu, Lock keypad,
Record, Voice clarity, Loudspeaker
or Handset.
Network services options are
Answer or Reject, Hold or Unhold,
New call, Add to conference, End
call, End all calls, and the following:
Send DTMF — to send tone strings
Swap — to switch between the
active call and the call on hold
Transfer — to connect a call on
hold to an active call and
disconnect yourself
Conference — to make a
conference call
Private call — to discuss privately
in a conference call
Warning: Do not hold the
device near your ear when
the loudspeaker is in use,
because the volume may
be extremely loud.
To Next Page
Loading...
