Settings
Copyright © 2006 Nokia. All rights reserved.
55
PIN2 code request — to select
whether the PIN2 code is required
when using a specific phone
feature which is protected by the
PIN2 code. Some SIM cards do not
allow the code request to be
turned off.
Call barring service — to restrict
incoming calls to and outgoing
calls from your phone (network
service). A barring password is
required.
Fixed dialling — to restrict your
outgoing calls to selected phone
numbers if this function is
supported by your SIM card. When
the fixed dialing is on, GPRS
connections are not possible
except while sending text
messages over a GPRS connection.
In this case, the recipient’s phone
number and the message center
number must be included in the
fixed dialing list.
Closed user group — to specify a
group of people whom you can call
and who can call you (network
service)
Security level > Phone — to set the
phone to ask for the security code
whenever a new SIM card is
inserted into the phone. If you
select Memory, the phone asks for
the security code when the SIM
card memory is selected, and you
want to change the memory in
use.
Access codes — to change the
security code, PIN code, UPIN
code, PIN2 code, or barring
password
Code in use — to select whether
the PIN code or UPIN code should
be active
Authority certificates or User
certificates — to view the list of
the authority or user certificates
downloaded into your phone. See
”Certificates” p. 75.
Security module sett. — to view
Secur. module details, activate
Module PIN request, or change
the module PIN and signing PIN.
See also ”Access codes” p. 13.
■ Restore factory
settings
To reset some of the menu settings
to their original values, select
Menu > Settings > Rest. factory
sett.. Enter the security code. The
names and phone numbers saved
in Contacts are not deleted.
■ Phone software
updates
Your service provider may send
phone software updates over the
air directly to your device (network
To Next Page
Loading...
