Write text
Copyright © 2006 Nokia. All rights reserved.
25
4. Write text
To enter text (for example, when
writing messages), use traditional
or predictive text input. When you
write text, press and hold Options
to toggle between traditional text
input, indicated by , and
predictive text input, indicated by
. Not all languages are
supported by predictive text input.
The character cases are indicated
by , , and . To change
the character case, press #. To
change from the letter to number
mode, indicated by , press and
hold #, and select Number mode.
To change from the number to the
letter mode, press and hold #.
To set the writing language, select
Options > Writing language.
■ Traditional text input
Press a number key, 1 to 9,
repeatedly until the desired
character appears. The characters
available depend on the selected
writing language. If the next letter
you want is located on the same
key as the present one, wait until
the cursor appears and enter the
letter. The most common
punctuation marks and special
characters are available under the
number key 1.
■ Predictive text input
Predictive text input is based on a
built-in dictionary to which you
can also add new words.
1. Start writing a word, using the
keys 2 to 9. Press each key only
once for one letter.
2. When you finish writing the
word and it is correct, to
confirm it by adding a space,
press 0.
If the word is not correct, press
* repeatedly, and select the
word from the list.
If the ? character is displayed
after the word, the word you
intended to write is not in the
dictionary. To add the word to
the dictionary, select Spell.
Enter the word using
traditional text input, and
select Save.
To write compound words, enter
the first part of the word, and
press the scroll key right to
confirm it. Write the last part of
the word, and confirm the word.
3. Start writing the next word.
To Next Page
Loading...
