Nokia 7650 - Gprs Data Counter; Viewing the General Log

Copyright © 2004 Nokia. All rights reserved.
Your phone
23
Setting a call cost limit for yourself
1 Select Options → Settings → Call cost limit → On.
2 The phone requests you to enter the limit in units. For this you may need the PIN2 code.
Depending on the Show costs in setting, enter either the amount of charging units or
currency.
When the charging limit you have set yourself is reached, the counter stops at its maximum
value and the note Reset all calls' cost counter is displayed. To be able to make calls, go to
Options → Settings → Call cost limit → Off. For this you need the PIN2 code, see p. 37.
Erasing call cost counters - Select Options → Clear counters. For this you need the PIN2
code, see p. 37. To clear an individual event, scroll to it and press .
GPRS data counter
Go to Log → GPRS
counter.
Allows you to check the amount of data sent and received during packet data (GPRS)
connections. For example, you may be charged for your GPRS connections by the amount
of data sent and received.
Viewing the general log
Go to Menu → Log
and move the joystick to
the right.
In the general log, for each communication event, you can see the sender or recipient
name, phone number, name of the service provider, or access point. See Fig. 5, p. 24.
Icons: for incoming,
for outgoing, and
for missed
communication events.
Note: Sub-events, such as a short message sent in more than one part and packet
data connections, are logged as one communication event.
Filtering the log
1 Select Options → Filter. A list of filters opens.
2 Scroll to a filter and press Select.