Copyright © 2004 Nokia. All rights reserved.
Settings
36
Access point - The access point name is needed when you want to use your phone as a
packet data modem to your computer. For more information on modem connections, see
p. 122.
Data call
Go to Settings →
Connection → Data call.
The Data call settings affect all access points using a data call and high speed data call.
Online time - If there are no actions the data call is dropped automatically after a time-out
period. The options are User defined, in which case you enter a time, or Unlimited.
Date and time
Tip! See also the
Language settings, p. 25.
• The date and time settings allow you to define the date and time used in your phone,
as well as change the date and time format and separators. Choose Auto time update if
you want the mobile phone network to update time, date, and time zone information
to your phone (network service). Choose Clock type → Analogue or Digital to change the
clock shown in standby mode.
Security
Phone and SIM
Explanations for the different security codes that may be needed:
• PIN code (4 to 8 digits) - The PIN (Personal Identification Number) code protects your
SIM card against unauthorised use. The PIN code is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the PIN code is blocked. If the PIN
code is blocked, you need to unblock the PIN code before you can use the SIM card
again. See the information about the PUK code.
To Next Page
Loading...
