Copyright © 2004 Nokia. All rights reserved.
Contacts
48
• To remove the ringing tone, select Default tone from the list of ringing tones.
Note: For an individual contact, the phone will always use the ringing tone that was
assigned last. So, if you first change a group ringing tone and then the ringing tone
of a single contact that belongs to that group, the ringing tone of the single contact
will be used when the contact calls you the next time.
Sending contact information
Glossary: When
you send or receive
contact information, the
term ‘business card’ is
used. A business card is a
contact card in a format
suitable to be sent in a
short message, usually in
‘vCard’ format.
1 In the Contacts directory, scroll to the card you want to send.
2 Select Options → Send business card then select the method, the choices are: Via short
message, Via e-mail (available only if the correct e-mail settings are in place), via Infrared,
or via Bluetooth. The contact card you want to send has now become a ‘business card’.
For further information, see the ’Messaging’ chapter (Chapter 6), ’Sending and receiving
data via infrared’, p. 121, and ’Sending data via Bluetooth’, p. 117.
• You can add received business cards to your Contacts directory. See ’Receiving smart
messages’, p. 74 for further information.
Managing contact groups
Options in the Groups list
view: Open, New group,
Delete, Rename, Ringing
tone, Contacts info, and
Exit.
You can create contact groups, which can, for example, be used as distribution lists for
sending short messages and e-mail. See also p. 47 for how to add a ringing tone for a
group.
Creating contact groups
1 In the Contacts directory, move the joystick to the right to open the Groups list.
2 Select Options → New group. See Fig. 4, p. 49.
3 Write a name for the group or use the default name Group and press OK.
To Next Page
Loading...
