Copyright © 2004 Nokia. All rights reserved.
Contacts
47
Replaying, erasing, or changing a voice tag
To replay, erase, or change a voice tag, open a contact card and scroll to the number that
has a voice tag (indicated by ) and select Options → Voice tags →
• Playback - to listen to the voice tag again.
• Delete - to erase the voice tag.
• Change - to record a new voice tag instead of the old one. Press Start to record.
Assigning speed dialling keys
Speed dialling is a quick way to call frequently used numbers. You can assign speed dialling
keys to eight phone numbers. Number 1 is reserved for the voice mailbox.
1 Open the contact card for which you want a speed dialling key and select Options →
Assign speed dial. The speed dialling grid opens, showing you the numbers from 1-9. See
Fig. 3, p. 47.
2 Scroll to a number and press Assign. When you return to the contact information view,
you can see the speed dial icon next to the number. See Fig. 2, p. 44.
• To call the contact by speed dialling, go to standby mode and press the speed dialling
key and .
Adding a ringing tone for a contact card or group
You can set a ringing tone for each contact card and group. When that contact or group
member calls you, the phone plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your phone recognises it).
1 Press the joystick to open a contact card or go to the Groups list and select a contact
group.
2 Select Options → Ringing tone. A list of ringing tones opens.
Tip! To listen to a
ringing tone, go to
Composer.
3 Use the joystick to scroll to the ringing tone you wish to use for the contact or group
and press Select.
Fig. 3 The speed dialling
grid
To Next Page
Loading...
