Copyright © 2004 Nokia. All rights reserved.
Contacts
46
Tip! To view a list
of voice tags you have
defined, select Options →
Contacts info → Voice tags
in the Contacts directory.
When recording, hold the phone at a short distance away from your mouth and face so
that the proximity sensor does not turn the loudspeaker off. After the starting tone, say
clearly the word(s) you want to record as a voice tag.
• Press Start to record a voice tag. The phone sounds a starting tone and the note
Speak now is displayed.
• Press Quit to return to the contact card.
4 After recording, the phone plays the recorded tag and the note Playing voice tag is
displayed. If you do not want to save the recording, press Quit.
5 When the voice tag has been successfully saved, the note Voice tag saved is displayed
and a beep sounds. A symbol can be seen next to the number in the contact card.
See Fig. 3, p. 47.
Note: Your phone may have 25 phone numbers to which voice tags are attached.
If the memory becomes full, delete some of the voice tags.
Making a call by saying a voice tag
Note: You must say the voice tag exactly as you said it when you recorded it.
1 In standby mode, press and hold . A short tone is played and the note Speak now
is displayed.
2 When you are making a call by saying a voice tag, the loudspeaker is in use. Hold the
phone at a short distance away from you mouth and face so that the proximity sensor
does not turn the loudspeaker off and say the voice tag clearly.
3 The phone plays the original voice tag, displays the name and number, and after 1.5
seconds dials the number of the recognised voice tag.
• If the phone plays the wrong voice tag or to retry voice dialling, press Retry.
Note: When an application using a data call or GPRS connection is sending or
receiving data, you cannot make a call by using voice dialling. To make a call by
using a voice tag, end all active data connections.
To Next Page
Loading...
