Your phone
12
2. Your phone
Display
When the car phone is ready for use
and no characters have as yet been
entered, the
standby display
as
depicted in the figure is shown. In
addition the logo of the network
operator is shown.
If you wish to activate a function
using a voice tag, you will first have
to call the
voice display
. To do so
from the standby display, press
You may adjust the display illumination for day- or nighttime
operation to optimise performance. For further information, see
Display backlight setting on page 33.
Display indicators
The indicators described below may be shown on the display.
Shows the signal strength of the cellular network at the
current location. The higher the bar, the stronger the
signal.
Indicates an ongoing call.
You have received one or more text messages.
Indicates unread text messages.
The call diverting feature is on (network service).
See Call divert on page 31.
The home zone service is active (network service).
You may enter numbers.
Turn the Navi
TM
wheel to the left.
You may speak now.
Turn the Navi
TM
wheel to the right.
You may enter letters.
Shows that roaming is active.
The network has deactivated the encryption function.
The ringing tone is switched off.
Bluetooth wireless technology is activated, see Bluetooth
wireless technology on page 41.
User profile 1 is in use.
See Switch user on page 45.
User profile 2 is in use.
See Switch user on page 45.
To Next Page
Loading...
