Tone settings
30
Tone settings
You can choose the desired ringing tone
for incoming calls, change the volume,
and switch warning tones on or off as
desired.
y
Use the Navi
TM
wheel to regulate the volume of the
ringing tone when the car phone is ringing to notify you of
an incoming call or to change the loudspeaker volume
during a call in progress.
a
Select Tones and press to access the menu items.
a
Scroll with to the option of choice and press to
select it.
a
Follow the instructions shown on the display.
Ringing volume
This option sets the loudspeaker volume for an incoming call.
Ringing tone
This option offers you a range of ringing tones to choose from.
Select the one you would like to have notify you of an incoming
call.
Warning tones
This option lets you activate or deactivate special notification
tones.
Settings
You may customise a number of the
settings in your car phone.
a
To make any of the above settings, select the Settings menu
in the standby display and press to open it.
Setting the time and date
To set the clock from the standby display:
a
Scroll with to Time settings and press to select
this option.
a
Scroll with to Set the Time and press to select
this option.
a
Scroll with to set the hour. Press to take over the
setting and continue with the minutes.
a
Repeat the above step to set the minutes.
a
Repeat the above procedure to access the options Time
format, Set the date, and Date format to make the desired
settings.
Call settings
This option lets you set a variety of call features. To make call
settings from the standby display:
a
Select the Settings menu and press to open it.
a
Scroll with to the Call settings option and press
to select it.
To Next Page
Loading...
