Settings
36
p
Default
The settings made by your service provider are active.
p
On
The closed user group service is active.
Fixed dialling numbers
You can restrict your outgoing calls to selected phone numbers,
if this function is supported by your SIM card. To save and edit
the numbers on this list, you need the PIN2 code.
You can choose from three options for this function:
p
Off
The fixed dialling numbers function is deactivated.
p
Number list
This option allows you to view the phone numbers that may
be used for outgoing calls.
p
On
The fixed dialling numbers function is active.
a
With the display in standby, select the Settings menu.
a
Scroll with to desired option and press to select
it.
a
Follow the instructions shown on the display.
For further information, see Access codes required for the SIM
card on page 11.
Audio settings
Your car phone supports a variety of options for output over a
loudspeaker:
p
Direct connection to the SP-2 loudspeaker supplied in the
sales package.
p
Connection to a compatible car radio loudspeaker over an
additional relay that switches audio output over to the
loudspeaker (not included in the scope of supply). Please ask
the service technician who is to install your car phone for
professional assistance.
a
To do so, select the option Loudspeaker.
p
Connection to compatible car radio loudspeakers via the
audio line-in of your car radio. You will need to adjust the
audio level suitably if this option is selected.
a
To do so, select the option Radio loudsp..
Factory settings
You can reset all of the menu settings to the original factory
settings from the standby display:
a
Scroll with to Settings menu and press to select
it.
a
Scroll with to Restore factory settings? and press
to select it.
a
Follow the instructions shown on the display.
Caution!
If you have erased a setting, you cannot undo this operation.
The data is irretrievably lost.
To Next Page
Loading...
