Bluetooth wireless technology
42
Pairing with devices with Bluetooth technology
To create a connection, you may need to exchange Bluetooth
passcodes with the device you are connecting to for the first
time. This operation is called pairing. The Bluetooth passcode is
a 1- to 16-character-long numeric code. If you are asked to
enter a passcode, you will need to enter the passcode supplied
with the device.
When establishing a wireless connection to devices such as a
mobile phone using Bluetooth technology, you may be able to
use a temporary passcode created by yourself. This passcode is
used only once and you do not have to memorise it. Enter this
passcode into the two devices sharing a Bluetooth connection.
Then follow the instructions shown on the displays of the two
devices.
To start pairing, select a device on the list:
a
Scroll with to the desired device and press to
select it.
View active devices
To show the currently active devices with Bluetooth technology
that are sharing a connection with your car phone:
a
In the Bluetooth menu, select View active devices and
press to view the active device.
If desired, you can end the Bluetooth connection in this menu.
View paired devices
You can view a list of the paired devices by selecting the option
View paired devices.
Some of the options below may be
available depending on the status of the device or the
connection:
a
To view the list of paired devices, scroll with to
Bluetooth and press to select it.
a
Scroll with to the desired compatible device and
press to select it.
a
Scroll with to the desired option and press to
select it.
a
Follow the instructions shown on the display.
x
Note that the latest pairing will be listed at the top.
Create connection
This option establishes a connection to a paired device with
Bluetooth technology.
Delete pairing
Select this option to remove a device from the list.
Request authorisation
You can define whether the connection from the paired device
is to be established automatically (No) or whether the phone is
to ask for authorisation before pairing (Yes).
To Next Page
Loading...
