28
©2000 Nokia Mobile Phones. All rights reserved.
You can also set the phone to ring only when you receive calls from
phone numbers that belong to a specific caller group. See ‘Profiles
(Menu 3)’.
Including a phone number in a caller
group
1. In the standby mode, press Names, and select Search.
2. Scroll to the name and phone number that you want to include
in the caller group.
3. Press (Detail and) Options.
4. Scroll to
Caller groups, and press Select.
5. Scroll to the desired caller group, e.g.
Family, and press Select.
Setting the ringing tone and graphic for
a caller group
1. In the standby mode, press Names.
2. Scroll to
Caller groups and press Select.
3. Scroll to the desired caller group and press Select.
4. Scroll to one of the following options and press Select.
•
Rename group Key in the name and press OK.
•
Group ringing tone Scroll to the desired ringing tone and
press OK.
Preset is the tone selected for the currently selected
profile.
•
Group graphic Scroll to On, Off, View graphic, Send via IR,
Send graphic (send via SMS), and press Select.
If you selected
Send graphic (network service), key in the
recipient’s phone number or recall it from phone book and
press OK.