In This Chapter Managing Power over Ethernet (PoE)
page 4-2 OmniSwitch 6360 Hardware Users Guide April 2021
In This Chapter
This chapter provides specifications and descriptions of hardware and software used to provide PoE for
attached devices.
The chapter also provides information on configuring PoE settings on the switch through the Command
Line Interface (CLI). CLI commands are used in the configuration examples; for more details about the
syntax of commands, see the OmniSwitch CLI Reference Guide. Topics and configuration procedures
described in this chapter include:
• Power over Ethernet Specifications on page 4-3
• Viewing Power Status on page 4-4
• Configuring Power over Ethernet Parameters on page 4-4
• Understanding Priority Disconnect on page 4-10
• Monitoring Power over Ethernet via the CLI on page 4-13
To Next Page
Loading...