Activate the loudspeaker
Select
. If you have attached a compatible headset with Bluetooth connectivity, to
route the sound to the headset, select Options > Activate BT handsfree.
Switch back to the handset
Select
.
End a call
Select
.
Switch between active and held calls
Select Options > Swap.
Tip: To put an active call on hold, press the call key. To activate the held call, press the
call key again.
Send DTMF tone strings
1 Select Options > Send DTMF.
2 Enter the DTMF string or search for it from the contacts list.
3 To enter a wait character (w) or a pause character (p), press * repeatedly.
4 To send the tone, select the tone. You can add DTMF tones to the phone number or
DTMF field in contact details.
End an active call and replace it with another incoming call
Select Options > Replace.
End all calls
Select Options > End all calls.
Many of the options that you can use during a voice call are network services.
Voice mailbox
To call your voice mailbox (network service), in the home screen, select Telephone, and
select and hold 1.
1 To change the phone number of your voice mailbox, select Menu > Settings and
Calling > Call mailbox, and a mailbox. Select and hold the current number.
2 Enter the number (obtained from your network service provider), and select OK.
28 Make calls
To Next Page
Loading...
Need help?
General
Weight and Dimensions
