Get started
8
Bluetooth devices. For instructions, see the user guide of your device. On
your device, select the car kit (Nokia CK-200) from the list of found
devices. On your device, enter the Bluetooth passcode 0000, to pair and
connect the device to the car kit.
Connect or disconnect the car kit manually
When you switch on the car kit, it tries to connect to one or two last
connected devices, depending on the Multipoint connection setting.
To manually connect the car kit to a device (for example, after
connection loss) or disconnect the car kit from a previously paired
device, in standby mode, select Menu > Settings > Connection >
Connection manager and the device.
■ Connect the car kit to two devices
You can connect the car kit simultaneously to two compatible Bluetooth
devices by default. To allow the car kit to connect to only one device at a
time, in standby mode, select Menu > Settings > Connection >
Multipoint connection > off. If you select on, the car kit can be
connected to two devices, and is displayed.
■ Software updates
You can update the software of the car kit.
Download and install the Nokia car kit updater application from
www.nokia.com/support to a compatible computer.
Use a USB data cable that has a standard USB plug at one end and a
micro USB plug at the other end, to connect the car kit display to a
computer. The cable is sold separately.
Open the updater application, and follow the displayed instructions.
Keep the USB cable connected while the software is being updated.
To Next Page
Loading...
