Nokia DNT2Mi sp/mp User Manual

Data Network Terminal Single-port and Multiport Operating Instructions
110 (128) © Nokia Corporation DN01145897
Nokia Proprietary and Confidential Issue2-0en
Note
- BF monitoring (only with the D2048-type adapters)
- CRC monitoring (only with the D2048-type adapters).
The collection of statistics data is not possible in the ’No frame’ mode.
• TS mapping (6,4, port #,3,4)
The placement of time slots to a G.704 frame can be set via this menu.
There are two placement alternatives: either in the same way as in the line
side or starting from a user given time slot, see the example in Figure 80.
Figure 80. Time slot mapping example, TS0 locally terminated
TS use in line
TS use in line
123456 87 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 310
P1 P1 P1 P1 P1 P1 P1 P1 P1 P1P2 P2 P2 P2 P2 P2 P2 P2 P2P3 P3 P3 P3 P3 P3 P3 P3 P3 P3 P3
P1 P1 P1 P1 P1 P1 P1 P1 P1
P2 P2 P2 P2 P2 P2 P2
P3P3 P3 P3 P3 P3 P3 P3 P3 P3
P2 P2
TS use in line
TS mapping in Port1
From the Port
menu, select
1st TS (TS1)
and special
TS (TS16)
From the Port
menu, select
as in line
P1
P2
TS use in line
123456 87 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 310
P1 P1 P1 P1 P1 P1 P1 P1 P1 P1P2 P2 P2 P2 P2 P2 P2 P2 P2P3 P3 P3 P3 P3 P3 P3 P3 P3 P3 P3
123456 87 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 310
P1 P1 P1 P1 P1 P1 P1 P1 P1 P1P2 P2 P2 P2 P2 P2 P2 P2 P2P3 P3 P3 P3 P3 P3 P3 P3 P3 P3 P3
TS mapping in Port2
From the Port
menu, select
1st TS (TS1)
and special
TS (TS32)
123456 87 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 310
P1 P1 P1 P1 P1 P1 P1 P1 P1 P1P2 P2 P2 P2 P2 P2 P2 P2 P2P3 P3 P3 P3 P3 P3 P3 P3 P3 P3 P3
P3
TS mapping in Port3

Nokia DNT2Mi sp/mp Specifications

General

Brand	Nokia
Model	DNT2Mi sp/mp
Category	Touch terminals
Language	English