Nokia DNT2Mi sp/mp - 8.2.1 Configuring a port

Data Network Terminal Single-port and Multiport Operating Instructions
62 (128) © Nokia Corporation DN01145897
Nokia Proprietary and Confidential Issue2-0en
8.2.1 Configuring a port
Figure 37. Configuring port 1 / V.xx type interfaces
CT103 timing
CT113
CT103 timing
CT114 inv
CT114 *
OK
EX
EX
OK
Save? OK/Exit
Configure
Port 1
Not allowed
Remote loop
Allowed *
Remote loop
DTE alarms
Disabled *
DTE alarms
Use of CT141Use of CT141
In use
Use of CT140Use of CT140
Ignored *
Use of CT107Use of CT107
CT103 timing
CT114 *
CT105, CT106 use
Ignored *
CT103 timing
CT105, CT106 use
Ignored *
CT105, CT106 use
Delay 8 bits
CT105, CT106 use
Delay 255 bits
CT105, CT106 use
Simul. carrier
EX
OK
OK
OK
OK
EX
Use of CT109
Normal *
Use of 109
Normal *
Use of CT109
Simul. carrier
OK
EX
Use of CT107
Ignored * CT108 - CT107
OK
EX
Use of CT140
Not in use * Not in use *
OK
EX
Use of CT141
Not in use * Not in use * In use
OK
EX
DTE alarms
Disabled * Enabled
Remote loop
Allowed *
OK
Dismiss
Accept
>
Accept
Accept
OK
EX
EX
OK
Dismiss