Nokia E51 - Manage Contact Groups; Add Ringing Tones for Contacts

To attach a small thumbnail image to a contact, select
Options > Edit > Options > Add thumbnail. The
thumbnail image is shown when the contact calls.
To listen to the voice tag assigned to the contact, select
Options > Play voice tag.
To search for a contact, enter the first letters of the
name to the search field. A list of the contacts starting
with the letters appear on the display.
To edit information in a contact, select Options >
Edit.
Tip: You can also use Nokia PC Suite to add and
edit contacts.
To send contact information, select Options > Send.
You can assign a default number or address to a contact
so you can easily call or send a message to the default
number or address, even if several numbers or
addresses are saved to that contact. The default
number is also used in voice dialling.
To change the default information for a contact, open
the contact, and select Options > Defaults. Select the
number or address you want to set as a default. The
default number or address is underlined in the contact.
To add a contact to a group, select Options > Add to
group (shown only if you have created a group).
Tip: To check to which groups a contact belongs,
select Options > Belongs to groups.
To add a speed dial key to the contact's phone number,
select Options > Assign speed dial.
To change the display order of the first and last names
of your contacts, select Options > Settings, and Last
name First name, or First name Last name.
Manage contact groups
You can create a contact group so that you can send
messages to several recipients at the same time.
1. Open the contact groups tab, and select Options >
New group.
2. Enter a name for the group, and select OK.
3. Open the group, and select Options > Add
members.
4. Scroll to each contact you want to add to the group,
and press the scroll key to mark it.
5. Select OK to add all marked contacts to the group.
To remove a contact from a contact group, scroll to the
contact that you want to remove, and select Options >
Remove from group.
Add ringing tones for
contacts
You can select a ringing tone for a contact or contact
group. If the caller's phone number is sent with the
incoming call and your device recognises the number,
the ringing tone plays when the contact calls you.
To select a ringing tone for a contact or contact group,
open the contact or contact group, and select
Options > Ringing tone. A list of ringing tones opens.
Select the ringing tone you want to use.
43
Business communications