To set the keypad to lock automatically
after a defined period, select Phone
and SIM card > Keypad autolock
period.
To set a time-out after which the device
is automatically locked and can be used
only if the correct lock code is entered,
select Phone and SIM card > Phone
autolock period. Enter a number for
the time-out in minutes or select None
to set off the autolock period. When the
device is locked, you can still answer
incoming calls, and calls may still be
possible to the official emergency
number programed into your device.
To set a new lock code, select Phone
and SIM card > Lock code. The preset
lock code is 12345. Enter the current
code and then the new code twice. The
new code can be 4-255 characters long.
Both alphabets and digits can be used,
and both uppercase and lowercase
alphabets are possible. The device
notifies you if the lock code is not
properly formatted.
Restore original settings
To restore the original device settings,
select Menu > Ctrl. panel > Settings
and General > Factory settings. To do
this, you need your device lock code.
After resetting, the device may take a
longer time to power on. Documents,
contact information, calendar entries,
and files are unaffected.
Positioning settings
Select Menu > Ctrl. panel > Settings
and General > Positioning.
To use a specific positioning method to
detect the location of your device, select
Positioning methods.
To select a positioning server, select
Positioning server.
To select which measurement system
you want to use for speeds and
distances, select Notation
preferences > Measurement system.
To define in which format the
coordinate information is displayed in
56 Settings
www.nokia.com/support
Cyan
To Next Page
Loading...
