Nokia HA-140W-B - Change of DNS (admin account)

Nokia HA-140W-B admin manual
3
Change of DNS (admin account)
To change your DNS properties for local LAN clients, log into your router (page 2) and go to Network >
LAN (see image 2). By default, the router uses two Hyperoptic DNS servers. These servers communicate
directly with the WAN ethernet router port and provide means for swift browsing. To define specific DNS,
use fields Primary DNS and Secondary DNS. In these fields, enter the IPv4 address of your desired server
(e.g. 8.8.8.8 or 8.8.4.4) and click Save. Click OK in the pop-up window to confirm router reboot and settings
change.
Image 2. Specifying DNS servers for LAN clients