Your Nokia N80
9
2 Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
3 If you select Bluetooth connectivity:
To have Nokia N80 search for devices with Bluetooth
connectivity, select Continue. Select your other device
from the list. You are asked to enter a code on your
Nokia N80. Enter a code (1-16 digits), and select OK.
Enter the same code on the other device, and select OK.
The devices are now paired. See “Pair devices”, p. 83.
For some phone models, the Transfer application is
sent to the other device as a message. To install
Transfer on the other device, open the message,
and follow the instructions on the display.
If you select infrared, connect the two devices.
See “Infrared connection”, p. 84.
4 From your Nokia N80, select the content you want to
copy from the other device.
Content is copied from the memory of the other device to
the corresponding location in your Nokia N80.
Copying time depends on the amount of data to be
transferred. You can cancel copying and continue later.
If the other device supports synchronization, you can keep
the data up-to-date in both devices. To start a
synchronization with a compatible Nokia device, select
Phones, scroll to the device, and select Options >
Synchronise. Follow the instructions on the display.
To view the log of a previous transfer, select Transfer log.
Essential indicators
The device is being used in a GSM network.
The device is being used in a UMTS network
(network service).
You have one or more unread messages in the Inbox
folder in Messag..
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox
folder.
You have missed calls.
Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set
to Off.
The device keypad is locked.
A clock alarm is active.
9244700_N80-1_en_zh.book Page 9 Thursday, March 23, 2006 2:34 PM
To Next Page
Loading...
Need help?
General
