Nokia N80 - Answer or Reject a Video Call; Options During a Voice Call

Make calls
65
If you do not want to answer a call, press . If you have
activated the Call divert > If busy function to divert calls,
declining an incoming call also diverts the call. See “Call
divert”, p. 102.
When you decline an incoming call, you can send a text
message to the caller informing why you cannot answer
the call. Select Options > Send text message. You can
edit the text before sending it. To set up this option and
write a standard text message, see “Call settings”, p. 94.
Answer or reject a video call
When a video call arrives, is displayed.
Tip! You can assign a ringing tone for video calls.
Press and select Profiles.
Press to answer the video call. Allow video image to
be sent to caller? appears on the display. To start sending
live video image, select Yes.
If you do not activate the video call, video sending is not
activated, and you only hear the sound of the caller. A grey
screen is shown in place of the video image. To replace the
grey screen with a still image captured by the camera in
your device, see “Call settings”, Image in video call, p. 94.
To end the video call, press .
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Call > Call waiting.
Tip! To change the device tones for different
environments and events, for example, when you
want your device to be silent, see “Profiles—set
tones”, p. 90.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer. To end the active call, press . To end both
calls, select Options > End all calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options during a call for some
of the following options: Mute or Unmute, Answer,
Reject, Swap, Hold or Unhold, Activate handset,
Activate loudsp., or Activate handsfree (if a compatible
headset with Bluetooth connectivity is attached),
End active call or End all calls, New call, Conference,
9244700_N80-1_en_zh.book Page 65 Thursday, March 23, 2006 2:34 PM