Your Nokia N80
10
The second phone line is being used (network service).
All calls to the device are diverted to another
number. If you have two phone lines (network service),
the indicator for the first line is and for the second
.
A headset is connected to the device.
The connection to a headset with Bluetooth
connectivity has been lost.
A loopset is connected to the device.
A Text phone is connected to the device.
A data call is active.
A GPRS or EDGE packet data connection is available.
A GPRS or EDGE packet data connection is active.
A GPRS or EDGE packet data connection is on hold.
A UMTS packet data connection is available.
A UMTS packet data connection is active.
A UMTS packet data connection is on hold.
You have set the device to scan for wireless LANs,
and a wireless LAN is available. See “Wireless LAN”, p. 99.
A wireless LAN connection is active in a network
that has encryption.
A wireless LAN connection is active in a network that
does not have encryption.
Bluetooth connectivity is on.
Data is being transmitted using Bluetooth
connectivity.
A USB connection is active.
An infrared connection is active. If the indicator is
blinking, the device is trying to connect to the other device
or the connection has been lost.
Keypad lock (keyguard)
To lock the keys, close the sliding keypad, and select Yes
when Lock keypad? is displayed. To lock the keys when the
slide is closed, press the power key, and select Lock
keypad.
To unlock, open the sliding keypad, or press (Unlock),
and select OK when Unlock keypad? is displayed.
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
9244700_N80-1_en_zh.book Page 10 Thursday, March 23, 2006 2:34 PM