Connectivity
84
Paired devices are indicated by in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Set as authorised—Connections between your device and
this device can be made without your knowledge.
No separate acceptance or authorization is needed.
Use this status for your own devices, such as your
compatible headset or PC, or devices that belong to
someone you trust. indicates authorized devices in the
paired devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings,
select Options > Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is
removed immediately, and the connection is
switched off.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity,
a tone sounds, and you are asked if you want to accept
the message. If you accept, is shown, and the item
is placed in the Inbox folder in Messag.. Messages received
through Bluetooth connectivity are indicated by .
See “Inbox—receive messages”, p. 47.
Switch off Bluetooth connectivity
To switch off Bluetooth connectivity, select Bluetooth >
Off.
Infrared connection
With infrared, you can transfer data such as business
cards, calendar notes, and media files with a compatible
device.
Do not point the IR (infrared) beam at anyone's eye or
allow it to interfere with other IR devices. This device is a
Class 1 laser product.
Send and receive data using infrared
1 Make sure that the infrared ports of the sending and
receiving devices are pointing at each other, and that
there are no obstructions between the devices.
The preferable distance between the two devices is up
to 1 meter (3 feet).
2 The user of the receiving device activates the infrared
port.
9244700_N80-1_en_zh.book Page 84 Thursday, March 23, 2006 2:34 PM
To Next Page
Loading...
