1
5 7 6
4
3
2
1- POWER SWITCH:
To turn on the device, press the power switch to (1) position. The startup tone will be heard
and after the FORS Relic logo is displayed for a short period of time, the main screen will
come up on the LCD panel.
2- GROUND TRACKING SWITCH:
When the ground tracking is active (at 1 position), the device will track the changes in
ground and automatically adjust the ground balance to suit. The invisible changes in
ground affects the detection depth as well as the discrimination ability of the device so you
can improve the performance of the device by activating this feature on suitable ground.
You can find more details about ground tracking on page 17.
3- MENU AND SETTINGS BUTTONS:
These buttons allow you to access the menu and scroll through options as well as adjust
device settings.
On the main screen, you can access the menu by pressing one of the up/down/+/- buttons.
You can select the menu options with the up and down button and change the value with
the + (plus) and - (minus). Pressing these buttons in a specific order will result in ''resetting
factory settings'' or ''saving startup settings''. You can find more details about this on page
27-28 under the title FACTORY and STARTUP SETTINGS.
DEVICE INTRODUCTION
CONTROLS
Page 6
To Next Page
Loading...
Need help?
General