12
Clean Water Tank
(CWT) Release Button
01
0302
04 05
Press the clean water tank (CWT) release button to remove the clean water tank
from the cleaner.
Fill the clean water tank with tap
water and formula. Ensure the correct
proportion of water and cleaning
formula is used by referring to the
formula label. Do not ll the clean water
tank over the Max line indicated on the
clean water tank.
Close the tank cap back into place. Place the clean water tank back into
the hard oor cleaner. You should hear
a “click” if done correctly.
Open the tank cap on the back of the
clean water tank.
NOTE: The recommended ratio of cleaning formula and water is 1:20.
FILLING THE CLEAN WATER TANK
To Next Page
Loading...