NOMA SurfaceElite+ - Operating Instructions

9
Hole
Click
ACCESSORY
HOLDER
01
02
Insert the handle into the top of the main body until you hear a “click”.
To remove: Press the hole located on the back of the main body with a tool
(like a screwdriver) and lift the handle at the same time.
Align the accessory holder with the slot of the storage base. Slide down the
accessory holder until it secures in place. The brush roller and cleaning tool
can be stored in the accessory holder
ASSEMBLY
OPERATING INSTRUCTIONS
SET UP DIRECTIONS
B
• Handle
• Main Body
Your SurfaceElite+ Cordless Hard Floor Wet Vacuum Cleaner comes in four easy-to-
assemble components and does not require any additional tools to assemble.
• Accessory Holder
• Storage Base