NOMA SurfaceElite+ - Emptying the Dirty Water Tank

16
01 02
03
Remove the dirty water tank (DWT)
from the hard oor cleaner by pressing
the dirty water tank release button.
Empty the dirty water tank when the DWT full indicator ashes. During normal
use, debris may accumulate in the dirty water tank. For best performance,
empty and rinse the dirty water tank after each use. Never operate the hard
oor cleaner without the dirty water tank and lter in place.
Before emptying the dirty water tank, ensure the appliance is turned off.
Pull up the tank lid and empty the dirty
water tank. Clean the dirty water tank
with the cleaning tool.
Remove the lter from the tank lid. If needed, wash the lter with clean water.
EMPTYING THE DIRTY WATER TANK
NOTE: Allow the wet lter to air dry completely before storing or
reinstalling onto the tank lid.
The lter does not need to be washed every time. Wash the lter when
there is a lack of suction or it is visibly dirty.
Dirty Water Tank
Release Button