NOMA SurfaceElite+ - Cleaning Instructions; Care and Maintenance

18
BRUSH ROLLER SELF-CLEANING
CLEANING INSTRUCTIONS
CARE & MAINTENANCE
C
To reduce the risk of an electric shock, ensure the hard oor cleaner is turned off
before performing any maintenance.
• Ensure the storage base is plugged in.
• Before brush roller self-cleaning, clean the DWT and ensure the water level in the
CWT is above 40% full.
Do not operate the hard oor cleaner without lters in place.
WARNING
WARNING
WARNING
Self-cleaning
Button
01 02
Place the hard oor cleaner on the
storage base after use. The hard
oor cleaner starts roller air drying
automatically while being charged.
Refer to page 10-11 for more details.
Press the self-cleaning button on the
top of the handle to start brush roller
self-cleaning.
NOTE: The brush roller self-cleaning lasts for 2 minutes every time. If
needed, repeat the self-cleaning process.