19
04 05
While the brush roller is self-cleaning,
the hard oor cleaner will stop roller
air drying. The air dry light on the
storage base and the roller air drying
indicator on the display will turn off.
The brush roller self-cleaning indicator
on the display will turn on, and the
suction power indicator will illuminate
intermittently.
When the hard oor cleaner completes
brush roller self-cleaning, the brush roller
self-cleaning indicator turns off. The
cleaner returns to charging and roller air
drying state.
Empty and clean the dirty water tank.
NOTE: While the brush roller is
self-cleaning, press the self-
cleaning button again; self-
cleaning will stop and the DWT
full indicator will ash. Empty
and clean the dirty water tank
immediately to avoid odour.
See instructions in EMPTYING
THE DIRTY WATER TANK (page.
16-17).
NOTE: During brush roller self-cleaning operation, if the brush roller
tangled indicator, or CWT lack of water indicator, or DWT full indicator
ashes, self-cleaning will stop. Please address it promptly.
Air Dry Light
Air Dry Button
03
To Next Page
Loading...