NOMA SurfaceElite+ - Page 20

20
Brush Roller Cover
Release Button
BRUSH ROLLER AIR DRYING
CLEANING THE BRUSH ROLLER COVER
01
Place the hard oor cleaner on the
storage base to air dry the brush roller
for about 4 hours after cleaning.
02
Ensure the storage base is plugged in.
The cleaner will automatically charge
and air dry the brush roller. See
instructions in CHARGING AND BRUSH
ROLLER AIR DRYING (page 10-11).
01
Grab the brush roller cover while
pressing the brush roller cover release
button and pull upward to remove
the brush roller cover.
02
Rinse the brush roller cover with clean
water.