NOMA SurfaceElite+ - Page 25

25
CWT lack of water
indicator is blinking.
CWT is empty. Rell the CWT.
All indicators are off
in operation.
Battery overheated or mal-
functioned.
Cool the hard oor cleaner
down and restart it.
Battery indicator
turns red.
The hard oor cleaner is in
low battery.
Charge the hard oor
cleaner as instructed on
page 10-11.
The hard oor clean-
er is not picking up
or suction power is
weak.
Dirty water tank is full. Empty the DWT.
The lter is dirty or not
installed.
Clean and dry the lter.
Follow lter cleaning instruc-
tions on page 16-17.
The lter needs to be re-
placed.
To purchase parts call
1-866-827-4985.
Debris channel is blocked.
Clean the debris channel
and DWT.
Battery may be depleted.
Charge the hard oor
cleaner as instructed on
page 10-11.
Dirty water tank is not in-
stalled properly.
Check the DWT for correct
installation and ensure it is
snapped rmly in place.
Dirty water escapes
from the cleaner.
Filter is missing or installed
incorrectly.
Check the lter for correct
installation. See page 16-17.
Filter is damaged and
needs to be replaced.
To purchase a replacement
lter, call 1-866-827-4985.
Dirty water tank is full or is
installed incorrectly.
Empty the DWT or position
the DWT correctly and snap
rmly into place.
The hard oor clean-
er turns off on its own.
Battery may be depleted.
Charge the hard oor
cleaner as instructed on
page 10-11.
Please do not return this product to store.
For difculties, questions or concerns, call NOMA
®
customer service at 1-866-827-4985 and a member of
our team will be happy to help you!