Norac UC5 - Page 27


25

ReturntoHeight
Whenthisoptionisenabled(checked),themainliftwillmovetothetargetheightandremaintherewhile
theUC5™systemisinautomaticmode.Aftertheinitialmainliftadjustments,nofurtheradjustmentsare
madetothecentersection.
HeadlandAssist

Figure9:HeadlandModeandHeadlandTrigger
Headland Assist™ is used to raise the wingsonly or theentire boomat theend ofthe field for turning.
Thisfeatureoperateswhenthesystemisinautomaticmode.TheHeadlandAssistheightcanbechanged
when the Headland Assistfeature is enabled by simply adjusting the targetheight.
 The HeadlandAssist
featurecanoperateintwodifferentmodes;mainorwingsonly.