26
If headland mode is set to main, when Headland Assist™ is triggered the wings will temporarily be
disabledandthemainliftwillraisetothepredeterminedHeadlandAssistheighttoallowtheoperatorto
turn around at the end of the field.When triggered again, the entire boom will
return to automatic
mode.
Ifheadland mode issetto wings only,whenHeadlandAssist is triggeredonly thewings willraiseto the
HeadlandAssistheight.Whentriggeredagain,theentireboomwillreturntoautomaticmode.
When the HeadlandAssist feature is enabled, a triggertype must be selected
to activate it in the field.
Thetriggermaybeeitherthemainliftup/downswitchortheremoteautoinputline.
MainLiftSwitch:
If the main lift switch is enabled as the trigger, Headland Assist will be triggered when the operator
presses the main up switch while in
automatic mode. By pressing the main down switch the boom will
returntoautomaticmode.Whenin manualmodethe mainliftswitchwilloperate the normalmain lift
function. Note that the Setpoint Bump increment/decrement and Terrain Assist™ features are disabled
forthemainliftswitchwhenheadlandtriggeris
settothemainlift.
RemoteAuto:
Enabling remote auto asthe trigger will allowa separateswitch totrigger HeadlandAssist.This switch
must be a momentary type switch.Remoteauto is aninputline located onthe UC5™ input module. If
remoteautoisenabledasthetrigger
thentheremoteswitcheswillalsobeenabled.
To Next Page
Loading...
