hold [DELETE] and press [RECORD]. The patch will be cleared to
the default patch.
Undo/Redo operations
Every single action of the sequencer is undoable. If you are not
quite happy with a recorded automation, you can undo it. Hate
that change of pitch on the last 4 notes ? Undo it. Not so bad in
the end ? Redo it. Simple hold [FUNC] and hit [UNDO] to undo
and … you guessed it, hold [FUNC] and hit [REDO] to redo.
Pattern settings
Scale and root note
To set up a scale and a key, hold [FUNC] and hit [SCALE]. Set up
the root note with the [NOTE] key and set the scale with the
[SEQ] key. Here is the list of the scale and their related [SEQ] key.
Scale and root are mostly useful with the randomizer, more on
the next section. You can visualize the selected scale on the
mini keyboard. Only the [NOTE] key LED in the selected scale are
on, with the root note a bit brighter. If you are allergic to music
theory, this is a pretty handy tool.
Custom scales
Each project hold 4 custom scales on top of the 16 fixed scales.
You can select it with the [PAGE] keys while the scale setting is
active. To add/remove note from a custom scale, hold the
desired [PAGE] key and hit [NOTE] keys on the MIDI keyboard.
Scale autoquantize
When scale autoquantize is enabled, changing the scale will
move the notes of the pattern according to the new scale, it
uses a smart algorithm that works pretty well even on custom
scale. The algorithm is however destructive : if you go from a 7
note scale to a custom scale of 4 notes and switch back to a 7
note scale, you wont get back the same pattern.
Transpose
To Next Page
