5.8 Information
BU 0200 GB Subject to technical alterations 141
Parameter Setting value / Description / Note Device Supervisor
Paramter-
satz
P750 Overcurrent statistic
S
0 ... 9999 Number of overcurrent messages during the operating period P714.
P751 Overvoltage statistic
S
0 ... 9999 Number of overvoltage messages during the operating period P714.
P752 Mains supply faults
S
0 ... 9999 Number of mains faults during the operating period P714.
P753 Overheating statistics
S
0 ... 9999 Number of overtemperature faults during the operating period P714.
P754 Parameter loss statistic
S
0 ... 9999 Number of parameters lost during the operating period P714.
P755 System faults statistic
S
0 ... 9999 Number of system faults during the operating period P714.
P756 Time out statistics
S
0 ... 9999 Number of Time out errors during the operating period P714.
P757 Customer faults statistic
S
0 ... 9999 Number of Customer Watchdog faults during the operating period P714.
P799 ... - 01
...
... - 05
Operating hours,
previous fault 1...5
0.00 ... ___ h This parameter shows the operating hours counter status (P714) at the moment of the previous
fault. Array 01…05 corresponds to the last fault 1…5.
To Next Page
Loading...
