nord NORDAC SK 225E - Potentiometer Adapter, SK CU4-POT

3.3 Internal Customer Unit
BU 0200 GB Subject to technical alterations 69
3.4 Potentiometer adapter, SK CU4-POT
The digital signals R and L can be directly applied to the corresponding digital inputs 1 and 2 of the SK 200E.
The potentiometer (0-10) can be evaluated via a 24V module or I/O extension and converted to proportional
impulses (frequency). These impulses can then be evaluated via the digital input 2 or 3 (P420 [02]/[03] =
26/27) of the SK 200E in the form of a setpoint value (P400 [-06]/[-07]).
Module
SK CU4-POT
Function
Pin
Colour
1
brown
24V supply voltage
Rotary switch L - OFF - R
2
black
Enable R (e.g. DIN 1)
3
green
Enable L (e.g. DIN2)
4
white
Access to AIN+
Potentiometer 10kΩ
5
brown
10V reference voltage
6
blue
Analog Ground AGND