nord NORDAC SK 225E - Brake Resistor, Electrical Data

NORDAC SK 200E Manual
28 Subject to technical alterations BU 0200 GB
2.3.4 Brake resistor, electrical data
Internal
Inverter type Resistor type Resistance
Continuous
operation /
max. limit
Energy
consumption*
Connection
cable or
terminals
Size I
BR internal (DIP 8 = on)
SK BRI4-1-100-100
Mat. No. 275272005
100 
100 W / 20% 1.0 kWs
Silicon flex
2x 0.75mm
2
approx.
275mm
SK BRI4-1-200-100
Mat. No. 275272008
200 
100 W / 20% 1.0 kWs
SK BRI4-1-400-100
Mat. No. 275272012
400 
100 W / 20% 1.0 kWs
Size II
SK BRI4-2-100-200
Mat. No. 275991115
100 
200 W / 20% 2.0 kWs
Silicon flex
2x 1.0mm
2
approx.
275mm
SK BRI4-2-200-200
Mat. No. 275272108
200 
200 W / 20% 2.0 kWs
*)Maximum once within 10s
In order to prevent impermissible heating of the connection unit, the
continuous power is limited to 1/5 of the BR rated power.
External
Inverter type Resistor type Resistance
Continuous
output / max.
limit
Energy
consumption*
Connecting
cable or
terminals
Size I
BR external
SK BRE4-1-100-100
Part No. 275273005
100 
100 W 1.0 kWs
FEP flex
3x 1.9mm
2
AWG 14/19
approx.
350mm
SK BRE4-1-200-100
Part No. 275273008
200 
100 W 1.0 kWs
SK BRE4-1-400-100
Part No. 275273012
400 
100 W 1.0 kWs
Size III
SK BRE4-2-100-200
Part No. 275273105
100 
200 W 2.0 kWs
FEP flex
3x 1.9mm
2
AWG 14/19
approx.
500mm
SK BRE4-2-200-200
Part No. 275273108
200 
200 W 2.0 kWs
*)Maximum once within 120s