nord NORDAC SK 225E - Page 52

NORDAC SK 200E Manual
52 Subject to technical alterations BU 0200 GB
Select language, short description
The following steps must be carried out to change the menu language used in the ParameterBox display.
On switching on the ParameterBox for the first time, “German” or “English” will be offered for selection. The
selection is made by pressing the selection keys (arrow R/L) and confirming with the OK key.
In the following, “English” was selected on switching on for the first time. After this selection the following
displays should appear (varies depending upon output and options).
205E 1.1kW/400V 1
> NORDAC <
Frequenzumrichter
ONLINE FI P1 E-block
Use the Selection keys or , to scroll
to the
Options menu
1
Optionen
>OK<
ONLINE FI P1 E-block
P1301 2
Sprache
Deutsch ...
ONLINE FI P1 E-block
Then press >OK<
OK
Using the Value key , select the required
language
... English
... Français
... Espanol
... Sverige
... Nederlands
After selection confirm with >OK<
OK
P1301 2
Language
English (e.g.)
ONLINE FI P1 Locked
Press both Selection keys and ,
simultaneously
1
Options
>OK<
ONLINE FI P1 Locked
205E 1.1kW/400V 1
> NORDAC <
Frequency Inverter
ONLINE FI P1 Locked
Press both Selection keys and ,
simultaneously
Initial display